React Data Grid CellRange
- Members
- Methods
- clone
- expand
- expandByRange
- flipDirectionHorizontally
- flipDirectionVertically
- forAll
- getAll
- getBordersSharedWith
- getBottomEndCorner
- getBottomLeftCorner
- getBottomRightCorner
- getBottomStartCorner
- getCellsCount
- getDirection
- getHeight
- getHorizontalDirection
- getInner
- getOppositeCorner
- getOuterBottomEndCorner
- getOuterBottomLeftCorner
- getOuterBottomRightCorner
- getOuterBottomStartCorner
- getOuterHeight
- getOuterTopEndCorner
- getOuterTopLeftCorner
- getOuterTopRightCorner
- getOuterTopStartCorner
- getOuterWidth
- getTopEndCorner
- getTopLeftCorner
- getTopRightCorner
- getTopStartCorner
- getVerticalDirection
- getWidth
- includes
- includesRange
- isCorner
- isEqual
- isNorthWestOf
- isOverlappingHorizontally
- isOverlappingVertically
- isSingle
- isSouthEastOf
- isValid
- overlaps
- setDirection
- setFrom
- setHighlight
- setTo
- toObject
Members
from
Source code (opens new window)cellRange.from : CellCoords
Usually the same as highlight, but in Excel there is distinction - one can change highlight within a selection.
highlight
Source code (opens new window)cellRange.highlight : CellCoords
Used to draw bold border around a cell where selection was started and to edit the cell when you press Enter. The highlight cannot point to headers (negative values) so its coordinates object is normalized while assigning.
to
Source code (opens new window)cellRange.to : CellCoords
End selection.
Methods
clone
Source code (opens new window)cellRange.clone() ⇒ CellRange
Clones the range coordinates.
expand
Source code (opens new window)cellRange.expand(cellCoords) ⇒ boolean
Adds a cell to a range (only if exceeds corners of the range). Returns information if range was expanded.
| Param | Type | Description |
|---|---|---|
| cellCoords | CellCoords | The cell coordinates. |
expandByRange
Source code (opens new window)cellRange.expandByRange(expandingRange) ⇒ boolean
Expand the current object by the range passed in the first argument.
| Param | Type | Description |
|---|---|---|
| expandingRange | CellRange | Object extending the range. |
flipDirectionHorizontally
Source code (opens new window)cellRange.flipDirectionHorizontally()
Flip the direction horizontally. (e.g. NW-SE changes to NE-SW).
flipDirectionVertically
Source code (opens new window)cellRange.flipDirectionVertically()
Flip the direction vertically. (e.g. NW-SE changes to SW-NE).
forAll
Source code (opens new window)cellRange.forAll(callback)
Runs a callback function against all cells in the range. You can break the iteration by returning
false in the callback function.
| Param | Type | Description |
|---|---|---|
| callback | function | The callback function. |
getAll
Source code (opens new window)cellRange.getAll() ⇒ Array
Get all selected cell coords defined by this range.
getBordersSharedWith
Source code (opens new window)cellRange.getBordersSharedWith(range) ⇒ Array
| Param | Type | Description |
|---|---|---|
| range | CellRange | The cells range to compare with. |
getBottomEndCorner
Source code (opens new window)cellRange.getBottomEndCorner() ⇒ CellCoords
Gets the bottom right (in LTR) or bottom left (in RTL) corner coordinates of this range. If the corner contains header coordinates (negative values), the corner coordinates will be normalized to 0.
getBottomLeftCorner
Source code (opens new window)cellRange.getBottomLeftCorner() ⇒ CellCoords
Gets the bottom left corner coordinates of this range, no matter if the code runs in LTR or RTL document mode. If the corner contains header coordinates (negative values), the corner coordinates will be normalized to 0.
getBottomRightCorner
Source code (opens new window)cellRange.getBottomRightCorner() ⇒ CellCoords
Gets the bottom right corner coordinates of this range, no matter if the code runs in LTR or RTL document mode. If the corner contains header coordinates (negative values), the corner coordinates will be normalized to 0.
getBottomStartCorner
Source code (opens new window)cellRange.getBottomStartCorner() ⇒ CellCoords
Gets the bottom left (in LTR) or bottom right (in RTL) corner coordinates of this range. If the corner contains header coordinates (negative values), the corner coordinates will be normalized to 0.
getCellsCount
Source code (opens new window)cellRange.getCellsCount() ⇒ number
Returns the number of cells within the range (excluding the column and row headers, if selected).
getDirection
Source code (opens new window)cellRange.getDirection() ⇒ string
Gets the direction of the selection.
Returns: string - Returns one of the values: 'NW-SE', 'NE-SW', 'SE-NW', 'SW-NE'.
getHeight
Source code (opens new window)cellRange.getHeight() ⇒ number
Returns selected range height (in number of rows excluding rows' headers).
getHorizontalDirection
Source code (opens new window)cellRange.getHorizontalDirection() ⇒ string
Gets the horizontal direction of the range.
Returns: string - Returns one of the values: W-E (west->east), E-W (east->west).
getInner
Source code (opens new window)cellRange.getInner() ⇒ Array
Get inner selected cell coords defined by this range.
getOppositeCorner
Source code (opens new window)cellRange.getOppositeCorner(coords, [expandedRange]) ⇒ CellCoords
Gets coordinates of the corner which is opposite to the matched. When the passed coordinates matched to the bottom-right corner of this range then the coordinates for top-left will be returned.
| Param | Type | Description |
|---|---|---|
| coords | CellCoords | Cell coordinates to check. |
| [expandedRange] | CellRange | optional The cells range to compare with. |
getOuterBottomEndCorner
Source code (opens new window)cellRange.getOuterBottomEndCorner() ⇒ CellCoords
Gets the bottom right (in LTR) or bottom left (in RTL) corner coordinates of this range. If the corner contains header coordinates (negative values), then the top and start coordinates will be pointed to that header.
getOuterBottomLeftCorner
Source code (opens new window)cellRange.getOuterBottomLeftCorner() ⇒ CellCoords
Gets the bottom left corner coordinates of this range, no matter if the code runs in LTR or RTL document mode. If the corner contains header coordinates (negative values), then the top and left coordinates will be pointed to that header.
getOuterBottomRightCorner
Source code (opens new window)cellRange.getOuterBottomRightCorner() ⇒ CellCoords
Gets the bottom right corner coordinates of this range, no matter if the code runs in LTR or RTL document mode. If the corner contains header coordinates (negative values), then the top and left coordinates will be pointed to that header.
getOuterBottomStartCorner
Source code (opens new window)cellRange.getOuterBottomStartCorner() ⇒ CellCoords
Gets the bottom left (in LTR) or bottom right (in RTL) corner coordinates of this range. If the corner contains header coordinates (negative values), then the top and start coordinates will be pointed to that header.
getOuterHeight
Source code (opens new window)cellRange.getOuterHeight() ⇒ number
Returns selected range height (in number of rows including rows' headers).
getOuterTopEndCorner
Source code (opens new window)cellRange.getOuterTopEndCorner() ⇒ CellCoords
Gets the top right (in LTR) or top left (in RTL) corner coordinates of this range. If the corner contains header coordinates (negative values), then the top and start coordinates will be pointed to that header.
getOuterTopLeftCorner
Source code (opens new window)cellRange.getOuterTopLeftCorner() ⇒ CellCoords
Gets the top left corner coordinates of this range, no matter if the code runs in LTR or RTL document mode. If the corner contains header coordinates (negative values), then the top and left coordinates will be pointed to that header.
getOuterTopRightCorner
Source code (opens new window)cellRange.getOuterTopRightCorner() ⇒ CellCoords
Gets the top right corner coordinates of this range, no matter if the code runs in LTR or RTL document mode. If the corner contains header coordinates (negative values), then the top and left coordinates will be pointed to that header.
getOuterTopStartCorner
Source code (opens new window)cellRange.getOuterTopStartCorner() ⇒ CellCoords
Gets the top left (in LTR) or top right (in RTL) corner coordinates of this range. If the corner contains header coordinates (negative values), then the top and start coordinates will be pointed to that header.
getOuterWidth
Source code (opens new window)cellRange.getOuterWidth() ⇒ number
Returns selected range width (in number of columns including columns' headers).
getTopEndCorner
Source code (opens new window)cellRange.getTopEndCorner() ⇒ CellCoords
Gets the top right (in LTR) or top left (in RTL) corner coordinates of this range. If the corner contains header coordinates (negative values), the corner coordinates will be normalized to 0.
getTopLeftCorner
Source code (opens new window)cellRange.getTopLeftCorner() ⇒ CellCoords
Gets the top left corner coordinates of this range, no matter if the code runs in LTR or RTL document mode. If the corner contains header coordinates (negative values), the corner coordinates will be normalized to 0.
getTopRightCorner
Source code (opens new window)cellRange.getTopRightCorner() ⇒ CellCoords
Gets the top right corner coordinates of this range, no matter if the code runs in LTR or RTL document mode. If the corner contains header coordinates (negative values), the corner coordinates will be normalized to 0.
getTopStartCorner
Source code (opens new window)cellRange.getTopStartCorner() ⇒ CellCoords
Gets the top left (in LTR) or top right (in RTL) corner coordinates of this range. If the corner contains header coordinates (negative values), the corner coordinates will be normalized to 0.
getVerticalDirection
Source code (opens new window)cellRange.getVerticalDirection() ⇒ string
Gets the vertical direction of the range.
Returns: string - Returns one of the values: N-S (north->south), S-N (south->north).
getWidth
Source code (opens new window)cellRange.getWidth() ⇒ number
Returns selected range width (in number of columns excluding columns' headers).
includes
Source code (opens new window)cellRange.includes(cellCoords) ⇒ boolean
Checks if given cell coordinates are within from and to cell coordinates of this range.
| Param | Type | Description |
|---|---|---|
| cellCoords | CellCoords | The cell coordinates to check. |
includesRange
Source code (opens new window)cellRange.includesRange(cellRange) ⇒ boolean
Checks if given range is within of this range.
| Param | Type | Description |
|---|---|---|
| cellRange | CellRange | The cells range to check. |
isCorner
Source code (opens new window)cellRange.isCorner(coords, [expandedRange]) ⇒ boolean
Checks if coordinates match to one of the 4th corners of this range.
| Param | Type | Description |
|---|---|---|
| coords | CellCoords | Cell coordinates to check. |
| [expandedRange] | CellRange | optional The cells range to compare with. |
isEqual
Source code (opens new window)cellRange.isEqual(cellRange) ⇒ boolean
Checks if given range is equal to this range.
| Param | Type | Description |
|---|---|---|
| cellRange | CellRange | The cells range to check. |
isNorthWestOf
Source code (opens new window)cellRange.isNorthWestOf(cellRange) ⇒ boolean
Checks if tested coordinates are positioned in north-west from this cell range.
| Param | Type | Description |
|---|---|---|
| cellRange | CellRange | The cells range to check. |
isOverlappingHorizontally
Source code (opens new window)cellRange.isOverlappingHorizontally(cellRange) ⇒ boolean
Returns true if the provided range is overlapping the current range horizontally (e.g. The current range's last
column is 5 and the provided range's first column is 3).
| Param | Type | Description |
|---|---|---|
| cellRange | CellRange | The cells range to check. |
isOverlappingVertically
Source code (opens new window)cellRange.isOverlappingVertically(cellRange) ⇒ boolean
Returns true if the provided range is overlapping the current range vertically (e.g. The current range's last
row is 5 and the provided range's first row is 3).
| Param | Type | Description |
|---|---|---|
| cellRange | CellRange | The cells range to check. |
isSingle
Source code (opens new window)cellRange.isSingle() ⇒ boolean
Checks if this cell range is restricted to one cell.
isSouthEastOf
Source code (opens new window)cellRange.isSouthEastOf(cellRange) ⇒ boolean
Checks if tested coordinates are positioned in south-east from this cell range.
| Param | Type | Description |
|---|---|---|
| cellRange | CellRange | The cells range to check. |
isValid
Source code (opens new window)cellRange.isValid(wot) ⇒ boolean
Checks if given coordinates are valid in context of a given Walkontable instance.
| Param | Type | Description |
|---|---|---|
| wot | Walkontable | The Walkontable instance. |
overlaps
Source code (opens new window)cellRange.overlaps(cellRange) ⇒ boolean
Checks if tested range overlaps with the range. Range A is considered to to be overlapping with range B if intersection of A and B or B and A is not empty.
| Param | Type | Description |
|---|---|---|
| cellRange | CellRange | The cells range to check. |
setDirection
Source code (opens new window)cellRange.setDirection(direction)
Sets the direction of the selection.
| Param | Type | Description |
|---|---|---|
| direction | string | One of the values: 'NW-SE', 'NE-SW', 'SE-NW', 'SW-NE'. |
setFrom
Source code (opens new window)cellRange.setFrom(coords) ⇒ CellRange
Set the new coordinates where selection starts from.
| Param | Type | Description |
|---|---|---|
| coords | CellCoords | Coordinates to use. |
setHighlight
Source code (opens new window)cellRange.setHighlight(coords) ⇒ CellRange
Set the new coordinates for highlighting selection.
| Param | Type | Description |
|---|---|---|
| coords | CellCoords | Coordinates to use. |
setTo
Source code (opens new window)cellRange.setTo(coords) ⇒ CellRange
Set new coordinates where selection ends from.
| Param | Type | Description |
|---|---|---|
| coords | CellCoords | Coordinates to use. |
toObject
Source code (opens new window)cellRange.toObject() ⇒ object
Convert CellRange to literal object.
Returns: object - Returns a literal object with from and to properties which each of that object
contains row and col keys.